Vehicle Fitment

Ramped up racks are designed to be used in all vehicles with a 50mm hitch receiver. However, as there is no standard hitch/vehicle configuration, there are a number of considerations to take into account before ordering your rack.

The 50mm hitch insert has two hitch pin positions to allow the rack to be easily mounted to most vehicles. (65mm and 135mm measured from the inserted end).

To ensure adequate ground clearance, a minimum hitch height of 380mm is recommended (measured on flat ground to the underside of the hitch).

Too ensure adequate clearance between the back of your vehicle and your bike the outer most point of your hitch should either be either equal or positive

Note: If the underside of your hitch is 300mm or lower and or your hitch mount is negatively inset by more than 50mm we recommend not purchasing one of our racks.

Still concerned?

If you have any concerns about fitting your vehicle please don't hesitate to contact us for assistance. If your rack does not work for your vehicle, we will work with you correct the problem in a cost effective and timely manner.